Home    Articles     GameIO Review     2 First test
Previous  1  2  3  4  A  Next 

The GameIO card is compatible with the Nintendo DS, DS Lite, GBA, GBA Micro, GPA SP. In this review we use a DS Lite.

There is a nds-hombrew project on Google code with some software examples on it.

As part of the first test I connected a few LEDs using 470 Ohm resistors. The software used was the gpiotest.nds from the Google code project. The vedio below shows the the Xiltendo CPLD in action.



First the CPLD is flashed with new software. Then the 6 pins of port A are set to output using the stylus. Finally the stylus is used to toggle the LEDs on and off. So the device works .

Previous  1  2  3  4  A  Next