Home 
Circuits Motor Controllers Simple servo controller
Description
Partlist
Files
Circuits Motor Controllers Simple servo controller
Simple servo controller
This cicuit allows you to test a servo. The angle of the servo can be set by means of the 10k potmeter.
Perhaps you will not be able to reach all positions with this circuit. Playing with other resistors may help.
Perhaps you will not be able to reach all positions with this circuit. Playing with other resistors may help.
Partlist
1 x 555 timer IC
1 x BC547 transistor
1 x 10k Ohm potentiometer
2 x 10k Ohm resistors
2 x 100nF condensators
1 x 220k Ohm resistor
1 x 15k Ohm resistor
1 x BC547 transistor
1 x 10k Ohm potentiometer
2 x 10k Ohm resistors
2 x 100nF condensators
1 x 220k Ohm resistor
1 x 15k Ohm resistor
Files
Comments
Mar 18 2007 7:23
Ronald Pilote
Looking for a simple control for servo with pot, to control 9.9 Honda carburator inlet. Basicly the standard control don't give precise control to achive a specific speed. Not to hot in electronics but trying. Servo Futaba S3010.
Thanks
Ronald
Thanks
Ronald
